Canon RF 5.2/2.8L DUAL FISHEYE
2,030.00 USD
Canon RF 5.2/2.8L DUAL FISHEYE
- RF-Mount Lens/Full-Frame Format
- Aperture Range: f/2.8 to f/16
- Captures Stereoscopic 3D 180° VR imagery
- Two Ultra-Low Dispersion Elements
10
People watching this product now!
Description
Canon RF 5.2/2.8L DUAL FISHEYE
| Specification | |
| Focal Length | 5.2mm |
| Maximum and Minimum Aperture | f/2.8 – f/16 (1/3 stops, 1/2 stops) |
| Interpupillary Distance / Baseline Length (Distance between Left and Right Lens Centers) | 60mm |
| Minimum Focusing Distance | 0.66 ft. (7.9 in.) / 0.2 m |
| Maximum Magnification | 0.03x |
| Angle of View (Diagonal) | 190° 00′ |
| Lens Construction (each lens) | 12 elements in 10 groups |
| Special Elements (each lens) | Two UD glass elements |
| Lens Coating | Canon SSC (Super Spectra Coating) |
| Canon SWC (Sub-wavelength Structure Coating) | |
| Fluorine Coating on the front surface of the front element | |
| Filter Size Diameter | Not Supported (Rear Gelatin Filter Holder support only) |
| Rear-Mounted Gelatin Filter Holder | Supported – Built-in |
| Aperture Blades (each lens) | 7 |
| Lens Switches | None |
| Dust/Water Resistance | Provided (rubber ring on lens mount) |
| Focusing System | Manual focusing |
| Left/right focus difference adjustment | User-adjustable, via adjustment dial (using included 1.5mm hexagonal wrench) |
| Dual Pixel CMOS AF | Not Supported — Manual focus only |
| Focus Guide | Supported – Alternate at the image center of either selected lens UI by INFO button with cameras equipped with compatible firmware. |
| Manual Focus Peaking | Supported with compatible cameras. |
| Full-time Manual Focusing | Not Supported |
| Control Ring | Not Supported |
| IS Mode Selection | Not Supported |
| Optical Image Stabilization | Not Supported |
| Stabilization with in-body IS (EOS R5, R6) | Not Supported |
| Dimensions (width x height x length) | 4.8 x 3.3 x 2.1 in. (121.1 x 83.6 x 53.5mm) |
| Weight | Approx. 12.4 oz. (350g) |
| Lens hood | Not Supported |
| Lens Cap | Dedicated Canon Lens Cap 5.2 (Center pinch type; bundled) |
| Dust Cap | Canon Lens Dust Cap RF |
| Lens Case | Canon Lens Case LS1014 (bundled) |
| RF Tele Extenders | Not Compatible |
| EF Extension Tubes | Not Compatible |
| Close-up Lenses | Not Compatible |
| Canon Gelatin Filter Holder IV | Not compatible; Built-in gelatin filter holder at rear of lens |
Additional information
| Brand |
|---|
