RODE Wireless Go Gen 3 (Dual) + Wireless Go Gen 3 Charging Case
380.00 USD
RODE Wireless Go Gen 3 (Dual) + Wireless Go Gen 3 Charging Case
17
People watching this product now!
Description
RODE Wireless Go Gen 3 (Dual) + Wireless Go Gen 3 Charging Case
| Specification | Details |
|---|
| Channels | 2 transmitters + 1 receiver (dual-channel system) |
| Transmission frequency | 2.4 GHz Series IV digital transmission with 128-bit encryption |
| Maximum range | Up to approximately 260 m (850 ft) line-of-sight |
| On-board recording | 32-bit float recording built into each transmitter, with over 40 hours of internal storage |
| Built-in microphones | Omnidirectional microphones integrated into each transmitter; 3.5 mm TRS input also available |
| Receiver output options | 3.5 mm TRRS output with headphone monitoring support |
| Battery life (single charge) | Up to 7 hours of continuous operation |
| Charging time | Approximately 2.5 hours |
| Frequency response | 20 Hz – 20 kHz |
| Dimensions (TX / RX) | 46.5 × 44 × 20 mm (≈ 1.8 × 1.7 × 0.8 inches) |
| Weight | Transmitter: 35 g |
| Compatibility | Works with cameras, smartphones, and computers via analog or USB-C connection |
Wireless Go Gen 3 Charging Case
| Specification | Details |
|---|
| Battery capacity | 4200 mAh |
| Power input | 5 V / 3 A |
| Maximum charge current | 3 A |
| Approximate full charging time | Around 2 hours |
| Usage extension (with case) | Up to 21 hours of continuous use (two full recharges) |
| Configuration support | Holds and charges 1 receiver + 2 transmitters |
| Input / Data port | USB-C (for both power and data access) |
| Dimensions (HxWxD) | 71 × 98 × 78 mm |
| Weight (case only) | 185 g |
| Weight (with Wireless GO Gen 3 units) | 280 g |
